Bricasti-design M10 Remote Control Manual do Utilizador

Owner’s Manual M10 The Model Ten Remote Console Rev 2.03.10

Operating the M10 Setup Key: Most of the functions of the M10 are the display and control of a selected M7. The setup key is unique to the M10 and

Operating the M10 Simultaneous Control and Display Feature: When an M10 is connected to an M7, both sets of controls; the front panel on the M7 and

Software Upgrades M7 Software Upgrade Installation Instructions On M7s manufactured before serial #0886 (the serial # is the last 4 digits on the st

Software Upgrades Note: If you can not find a tool as shown above, a very small screw driver or pointed object can be used to pry them out. Care m

Notes 9

M10 The Model Ten Bricasti Design Ltd Bricasti Design.com All rights reserved

Unpacking and inspection After unpacking the M10 save all packing materials in the event you ever need to ship the unit. Thoroughly inspect the M10

Important Safety Instructions EMC / EMI This equipment has been tested and found to comply with the limits for a class B Digital device, pursuant to

Introduction Congratulations on the purchase of your new M10 Remote console. We at Bricasti Design have set out to design the world’s best digital p

Installing the M10 The M10 can control from one to 8 M7s. Included your M10 kit is one 10 meter serial cable, for connecting the M10 to the first M7

Installing the M10 Cables and Wiring The M10 is supplied with its own 10m serial cable and termination plug for the setup of one M7 to the M10 remot

Operating the M10 The M10 is designed as a remote control for one or more M7 processors. The majority of the functions of the M10 are identical to

Operating the M10 Power up: Once your system is wired and the M7s are connected to the M10, there is no special sequence to powering up the “slave”